The Bitaxe Solo Miner Bundle

The Bitaxe Solo Miner Bundle (Total Combined Hashrate: 8.4 TH/s)

1. Bitaxe Supra Hex 703 (4.2 TH/s)

The high-performance miner utilizes a six-chip array for maximum hashrate.

Hashrate: 4.2 TH/s (SHA-256)

ASIC Chips: 6x BM1368 

Power Consumption: ~85W – 95W

Efficiency: ~21–23 J/TH

Form Factor: Compact, desk-scale hardware

Recommended Factory Settings: (If not configured please update.)
Frequency: 550
Core Voltage: 1250

Mining Modes: Solo mining, pool mining, or node-connected mining setups

Hardware: Features a large dedicated heatsink and high-RPM cooling fan to maintain thermal equilibrium under load.

2. Bitaxe Gamma GT 801 (2.4 TH/s)

A high-speed dual-chip miner designed for a balance of power and thermal efficiency.

Hashrate: ~2.15 - 2.4 TH/s (stock operation)

Algorithm: SHA-256

ASIC Chips: 2x BM1370 (5nm)

Power Consumption: ~38-43 W (stock settings)

Efficiency: ~16–20 J/TH depending on configuration

Interface: Web-based management interface

Mining Modes: Solo mining, pool mining, or node-connected mining setups

Form Factor: Compact, desk-scale hardware

Recommended Factory Settings: Should be operated with the provided 5V 10A power supply.

Hardware: Includes a 0.91-inch OLED screen for real-time hashrate monitoring and a quiet-run cooling fan (~40 dB).

3. Bitaxe Gamma 601 (1.1 TH/s)

The standard-setter for ultra-efficient, single-chip solo mining.

Hashrate: 1.2 TH/s

Algorithm: SHA-256

ASIC Chip: 1x BM1370 (5nm)

Power Consumption: ~16–20 W

Efficiency: 15 J/TH

Cooling: Air-cooled with external fan support

Noise Profile: Low, depending on fan selection

Form Factor: Compact, desk-scale hardware

Connectivity: Web-based management interface

Primary Use: Solo mining, pool mining, and educational mining environments

Recommended Factory Settings: Uses a 5V 4A DC power supply. Factory tuned for "set-and-forget" operation with minimal heat output.

4. Bitaxe Gamma Supra 403 (0.7 TH/s)

A stable, entry-level unit focusing on low power draw and consistent operation.

Hashrate: ~0.7 TH/s (stock operation)

ASIC Chips: 1× BM1368

Algorithm: SHA-256

Cooling: Air-cooled

Power Consumption: ~15 W

Efficiency: ~21–22 J/TH

Form Factor: Compact, desk-scale hardware

Primary Use: Solo mining, pool mining, and educational mining environments

Bundle Technical Overview

• Firmware: All units come pre-loaded with AxeOS, providing an open-source web interface for easy configuration.

• Connectivity: Each unit operates autonomously via built-in WiFi; no external controller is required.

• Power Requirements: Each unit includes its respective factory-recommended power supply unit (PSU) to ensure stable voltage delivery.

Safety & Usage Notes

This product is specialized computing hardware intended for experienced users and hobbyists. It generates heat during normal operation and requires proper ventilation, appropriate electrical setup, and safe operating conditions. Do not operate near flammable materials and ensure airflow is not obstructed. This product is not a consumer household appliance.

For additional details, please review our Safety & Usage Information page prior to operation.

Please note: While all units meet the guaranteed hash rates, slight variances may occur from batch to batch. Power consumption might also vary depending on components like fans or power supplies. This approach allows me to secure the lowest pricing possible for you. Rest assured, each unit is vetted for performance!

Overclocking increases power consumption, heat output, and overall stress on components. Operating the miner beyond recommended specifications may void the manufacturer warranty and can result in reduced hardware lifespan, permanent damage, or unsafe operating conditions if proper ventilation and electrical setup are not maintained. Excessive heat may increase the risk of damage to surrounding equipment or materials. Overclocking is performed entirely at the user’s own risk and is not recommended for beginners.

Stock units include a power supply designed for operation at factory-recommended settings. Operation beyond stock specifications may require a higher-capacity or upgraded power supply to safely support increased power demand. Operating an overclocked miner with an undersized or inadequate power supply may lead to instability, hardware failure, or unsafe operating conditions.

Additional Notes
Mining is probabilistic in nature. Results are not guaranteed and depend on network difficulty, hashrate, and time.